User guide

EXI-01-04-06-14-GB
- 24 -
13. MAIN PARAMETERS
User can adjust the scale to external ambient conditions (setting filters) or
individual requirements (autozero, tare value). Respective parameters can
be found in <P1.rEAd> parameters group.
13.1. Adjustment of filtering level
Procedure:
• Following point 11 of this manual enter <P1.rEAd> submenu, next:
1 - 4 - filtering levels to be selected (depending on the ambient
conditions)
Return to weighing:
See point - 11.2. – return to weighing.
NOTICE:
The higher filtering level the longer stabilisation time.