User manual

Procedure:

• Enter parameters group < Working Modes> according to ch. 24

of this manual,

• Enter the required working mode and choose <

Tare mode>

and then set the required option.

Options:

Single

Basic tare mode. The set (chooden) tare value is

overwritten after entering a new value

Current sum

Summing up tare values of product and package together

with manually inscribed tare. After next setting of product

or package tare the entered tare value is disabled

Total sum

Summing up all subsequently entered tare values

Autotare

Automatic tare mode together with mode <Sum of all>

Each

measurement

Automatic tarring for each accepted measurement result.

24.6. Labelling mode

Labelling mode can be initiated together with every working mode. The

labelling system is intended to print labels for marking weighed goods e.g. a

packing process. The program can print standard labels for single products,

cumulative labels for sticking to bulk containers and cumulative labels for

cumulative labels for sticking to the large transport containers holding bulk

containers.

In submenu < Labelling mode> there are accessible following special

functions:

Number of labels

No. of cumulative labels

No. of CC labels

C label automatic triggering

CC label automatic triggering