User manual

84
2. Before updating the software, go to scale’s submenu:
“
Communication / Ethernet” and set transmission
parameters for compatible with the client’s local network.
Procedure:
• Enter submenu < Update> in accordance with point 23 of this user
manual,
• Select parameter <
Software version on server> which reads
software version and its availability date on RADWAG server.
Notice:
In case of no connection with the global network Intranet or incorrect
settings of Ethernet parameters, the scale displays the following
message: “
No connection”.
• Go to parameter < Update From server> which displays the
following message:
• Accept the message by pressing key which is followed by
displaying the updating progress window:
• After downloading the update press an active key which is
followed by displaying a message: