User manual

82
• Take the load off the pan of platform 1,
• Press button
. The following message appears during adjusting
start mass: „Evaluation of starting mass”,
• After the procedure has been completed the following message
box appears:
• Accept the message box by pressing key and return to weighing
mode.
22.3. Report from adjustment process
Parameter < Report printout> enables activating the function of
automatic printout of a report from adjustment process on a printer plugged
to the scale.
Procedure:
• Enter submenu < User Adjustment> in accordance with ch. 22
of this user manual, select parameter <
Report printout> and
set its appropriate value.
Where:
-
Automatic report printout switched off
-
Automatic report printout switched on
Notice:
Submenu: “
Devices / Printer / Printouts
/
Adjustment report Printout template” enables optional modification
of report template (see ch. 16.2.3 of this user manual).