User manual

72
• Choose the required function from the list and return to weighing
saving the changes according to ch. 12.2 of this manual.
Notice:
By default all outputs have no function attributed – setting <None>.
19. AUTHORIZATION
The submenu < Authorization> is accessible only while being logged
in as the Administrator. In this group of parameters access levels can be
outlined.
To enter submenu < Authorization>, press and then:
„ Authorization”.
19.1. Anonymous Operator
The program allows to attribute the authorization access level to an operator
who does not perform the log-in procedure (anonymous operator).
Procedure:
• Enter < Authorization> according to ch. 19 of this manual,
choose <
Anonymous Operator>, and then set the
authorization access level.
Accessible authorization levels:
None, Operator, Advanced Operator, Administrator.
19.2. Date and time
Default settings allow a logged-in Administrator to change settings of date
and time. Software however allows to change the access level to this option:
<
Date and time>.