User manual
70
The bargraph field between the above values gets automatically rescaled
and it is additonally marked by a “magnifier” pictogram visible in graph’s
left corner.
• Signaling mass btween the value of Qn+T and Qn-2T:
• Signalling mass above the set value of Qn+2T:
Caution:
In case of additional declaring the values for MIN, MAX limits, the “control”
bargraph refers to the MIN, MAX limits and the nominal mass, but without
displaying the errors for T and 2T.
18. INPUTS / OUTPUTS
PUE 7 weighing indicator are equipped with 4 inputs / 4 outputs. To adjust
software to the users needs configure inputs outputs in the submenu
in the submenu <
Inputs / Outputs>:
• indicator inputs,
•
indicator outputs.
In order to enter submenu < Inputs / Outputs>, press
and then
: „ Inputs / Outputs”.
18.1. Configuration of inputs
Procedure:
• Enter < Inputs / Outputs> according to ch. 18 of this manual,
Qn
MIN
MAX