User manual

67
17.4.3. Bargraph “Signalling of checkweighing ranges”
Settings of “Signalling checkweighing ranges” bargraph are accessible
in submenu “
Display / Bargraph / “Signalling
checkweighing ranges”:
MIN, MAX thresholds working
mode
Stable – signalling of MIN, MAX thresholds is
previewed on exceeding LO threshold and
reaching stable measurment result;
Unstable – signalling of MIN, MAX thresholds
is previewed on exceeding LO threshold
OK threshold working mode
Stable – signalling of OK thresholds is
previewed on exceeding LO threshold and
reaching stable measurment result;
Unstable – signalling of OK thresholds is
previewed on exceeding LO threshold
Min threshold signalling colour
Colour selection for signaling MIN threshold.
18 colours palette available.
OK threshold signalling colour
Colour selection for signaling OK threshold.
18 colours palette available.
Max threshold signalling colour
Colour selection for signaling MAX threshold.
18 colours palette available.
Gradient
Enabling / Disabling filling effect “Gradient”
type.
Background colour
Colour selection of a bargraph background.
18 colours palette available.
Frame colour
Colour selection of bargraph frame.
18 colours palette available.
Means of operation:
• This type of bargraph comprises one green and 2 red fields.
• The left red field – signals that the load on the pan is lower than
the minimum weighing threshold (Min threshold);
• The central green field – signals that the load on the pan is within the
set required interval for the weighed product (OK value between Min
and Max thresholds);