User manual

The scale can communicate with the reader via following ports:

• RS232 (1),

• RS232 (2).

16.4.2. Procedure of attributing the card number to an operator

To use a transponder card to log on an operator the card needs to be

ascribed to the operator in the database of operators.

Procedure:

• Connect the transponder card reader to the required communication

port (RS 232 (1) or RS 232 (2)),

• Choose a communication port for the reader (see ch. 16.4.1 in this

manual),

• In submenu <

Communication> set the baud rate to the same

as in the reader (default 9600b/s),

• Enter the database of operators and edit the selected operator going

to the field <

Card Number>,

• After entering the field <

Card Number> you will see the editing

field <Card Number> with the screen keyboard,

• Having approached the card to the reader the program automatically

displays in editing field <Card Number> the number of read card,

• Confirm the number by pressing

and return to weighing.

16.5. Additional display

16.5.1. Additional display port

Procedure:

• Enter parameters group < Devices> according to ch. 16

of this manual, select „

Additional display / Port”

and then choose an appropriate option from the list.