User manual

Procedure:

• Enter submenu < Barcode Scanner> according to ch. 16.3 of this

manual,

• After entering parameter <

Test> window <Test> is opened

with an ASCII text box and HEX (hexadecimal) field,

• After scanning the code is entered to the ASCII field and HEX filed

and at the bottom of the window a test result is displayed.

When:

• <Prefix> and <Suffix> declared in settings are the same as

<Prefix> and <Suffix> in the read code then the test result is

<Positive>,

• <Prefix> and <Suffix> declared in settings are not the same as

<Prefix> and <Suffix> in the read code then the test result is

<Negative>.

16.4. Transponder card reader

Selecting operator (logging in) can be done in two ways:

• Typing a password on a keyboard,

• Approaching a transponder card to the reader.

The card needs to be registerd first.

Notice:

In case of problems with reading transponder cards check the submenu

Communication> and set appropriate baud rate (default 9600b/s).

16.4.1. Com port for transponder card readers

Procedure:

• Enter group of parameters < Devices> according to ch. 16

of this manula, select „

Transponder cards reader / Port”

and set appropriate option.