User manual

44
Procedure:
Enter < Communication> parameter group as described
in chapter 16 of the manual,
Select:
Tcp / Port” then you will see window <Port>
with the screen keyboard,
Enter the required number and press
.
Notice:
The number of TCP port in RADWAG instruments is set to default value:
4001.
16. DEVICES
16.1. Computer
The scale can cooperate with a computer. Active connection scale-computer
is signalled by icon
in the top bar of the main window. In submenu
<
Computer> some settings needs to be configured for cooperation
with computers.
Enter submenu < Computer>, press and then:
Devices / Computer.
16.1.1. Computer port
Procedure:
Enter parameters’ group < Devices> according to ch.
16 of this manual,
Select
Computer / Port” and then set the appropriate option.
The scale can communicate with a computer via following ports:
RS232 (1),
RS232 (2),
Tcp.