User manual

212
11. Chose <Barcode> from the list e.g. EAN-13.
12. Chose from list <Variable> item „7 Net mass in adjustment unit”
and press
, then the variable is placed in the table
of variables show below.
13. In column <Formatter> type:V6.3 (mass in EAN13 as a 6-digit code
with 3 decimal places).
14. Confirm the entered item by pressing
, then the barcode
is automatically placed on the label.
15. Save the created pattern chosing from the menu „File / Export *.lb”.
Notice:
Recorded templates of labels in files with *.lb extension are not editable.
This is advisable to record designs of labels in files with *.lab extension
as well (software menu: File / Save as…) to use/edit the designs of
labels in the future.