User manual

193
37. TECHNICAL PARAMETERS
PUE 7 PUE 7P
Housing plastic
panel mounting
steel housing
Display
5,7” with resistive touch panel
Power Supply
Supplier 120÷230AC/
10÷15VDC 21W
10÷15VDC / 21W
Optional power supply
Accumulator 6V
Accumulator 6V
Operation Temperature
-10°C to 40°C
OIML class
III
Number of verification intervals
6000
Max. change of input signal
19.5Mv
Max. Voltage per verification interval 3.25µV
Min. Voltage per verification division 0.5µV
Min. impedance of tensometer 80 Ω
Max. impedance of tensometer
1200 Ω
Tensometer excitation voltage
5V
Load cell connectivity
4 or 6 wires + shield
Number of platform
Max. 2
Max. 4
2 x RS232
Standard
2 x USB
Standard
Ethernet
Standard
4IN/4OUT (inputs/outputs)
Standard
Multi-range possibility yes
38. ERROR MESSAGES
Err2
-
Value beyond the zero range,
Err3
-
Value beyond the tare range,
Err8
-
Tarring / zeroing operation time exceeded,
NULL
-
Zero value from the AD converter,
FULL
-
Measurement range overflow,
HI
Display range overflow,
LH
-
Start mass error, the mass on the weighing platform is
beyond the acceptable range (-5% to +15% of start mass)