User manual

32. WORKING MODES – ANIMAL WEIGHING

Working mode < Animal weighing> enables weighing objects which

do not stabilize if placed on scale’s weighing platform and while carrying out

weighing process. Weighing process is achieved by implementing parameter

of time for stability of measurement, which is set in global parameters of the

working mode. This working mode is mainly utilized for weighing different

kids of animals. The mode may be controlled automatically or manually – i.e.

the weighing process is triggered manually or automatically.

32.1. Starting the operating mode

Procedure:

• While in main window of the software, press on-screen key, located

in the upper bar of the window, which opens submenu <Working

Modes> containing list of available working modes,

• Select working mode <

Animal weighing >, the software

automatically returns to displaying the main window, and the upper bar

indicates the icon

of selected working mode,

• Simulataneously, an additional hot key is activated on the far right side

of the bottom tool bar:

Start animal weighing process

32.2. Local setting of a working mode

Local settings for the working mode < Animal weighing> are accessible

on pressing a hot key <

Local parameters>:

Checkweighing

Detailed description in ch. 24.4 of the user manual

Tare mode

Detailed description in ch. 24.5 of the user manual

Labelling mode

Detailed description in ch. 24.6 of the user manual

Statistics

Detailed description in ch. 24.7 of the user manual