User manual

132
Pressing the (control stop) key is followed by displaying a message:
Pressing key causes reutining to the control process in progress.
Pressing
key causes terminating the control and returning to settings
of the CPG mode.
Simultaneously, a control report with status <Terminated> is added to the
database of <
Controls>.
30.7. Logging out from a control process in progress
Procedure:
• While in control mode perss pictogram with name of the logged operator
located in the bottom bar of the display,
• The operator is automatically logged out and simultaneously a window
<Insert Password> for logging in is displayed with the name of the
previously logged operator: