User manual

- 67 -
•
When the balance indicates stable measurement pictogram press
Print/Enter key,
•
As the display indicates a command Load L – place the beaker with tested
liquid on the rack’s basis under the balance and hang the sinker on the
hook. The sinker has to be fully immersed in the tested liquid
,
•
Then determine the density measurement result by pressing Print/Enter
key; the balance indicates the density of tested liquid in [g/cm
3
].
CAUTION:
Pay special attention to presence of air bubbles during measuring process.
If air bubbles are on sample’s surface during measuring process, they may
be a source of unreliable measurements.