User manual

- 19 -
• mass indication of a load placed on balance’s weighing pan can be tarred for
multiple times by pressing ESC/TARE key ((pay attention not to exceed
maximal capacity of a balance by applying multiple tare function),
During times between carrying out the following measurement series do not unplug
the balance from mains. It is recommended to switch off balance’s display by
pressing ON/OFF key. On repeated pressing of the ON/OFF key the balance is
ready for operation and carrying out the following measurements.
9.1. Selection of basic measuring unit
Function is used to set the measuring unit which will be displayed on balance
switching on.
In order to set the measuring unit go to submenu P5 Units,