User manual

- 169 -
List of parameters defined for a control:
1. Product
[name of a product which packaging is
checked for average tare determining
process]
2. Status
[status (result) of a process]
3. Date
[date of carried out process]
4. Tare
[determined value of packaging tare]
5. S
[average standard deviation]
6. 0,25 T1
[the value of a criterion for process
result]
7. No. of measurements
[Number of completed measurements of
tare value]
8. User
[name of a user carrying out the process]
9. Method
[control method (internal criteria,
regulated by the act)]
29.10. Pipettes
Database of Pipettes contains records and specification on pipettes to be
calibrated.
Procedure
• Enter submenu < Databases>, and press < Pipettes> field
• Press < Add > soft key should a new pipette be added,
• If a pipette already exists in the database of pipettes, press field with its
name to enter its specification which is optionally configurable.
List of parameters defined on a pipette:
1. Name
2. Code
3. Model
4. Tip
5. Type of volume
6. Nominal volume
7. Minimal volume
8. Number of channels
9. Type
10. Tested volumes