Technical data

43
Designed for moisture analyzers – model MA.3Y
It enables measurement of temperature with a probe installed on a
cable. The control thermometer features fully waterproof casing and
automatic switch-off function, preventing from battery discharging.
Powered from batteries: 3 x 1.5V (LR44).
Compatible with:
MA.3Y moisture analyzers
Model
CONTROL THERMOMETER SET FOR MA.3Y
Calibration of thermometer GT 105k-12
The set is dedicated for determining air density. It consists of two
cylindrically shaped mass standards, and it is designed for use in
microbalances MYA, analytical balances XA/3Y & XA/X with 0.01 [mg]
accuracy.
Different types of balances use different models of air density
determination kit:
For MYA microbalances:
- diameter 8 × 12 mm made of stainless steel
- diameter 12 × 16 mm made of aluminium
For XA.3Y & XA/2X balances:
- diameter 34 × 40 mm made of aluminium
- diameter 24 × 28 mm made of stainless steel
Model
AIR DENSITY DETERMINATION KIT
Special design of the suitcase ensures instrument's safe transport
while on site. The suitcase is durable for shocks (aluminium
construction with internal filling from polyurethane foam).
Compatible with:
PS/X; PS/C; WLC/A2; WTB
Model
SUITCASE FOR BALANCE - Model W1
Additional equipment for laboratory balances
AIR DENSITY DETERMINATION KIT
SUITCASE FOR BALANCE
CONTROL THERMOMETER SET FOR MA.3Y
Intertech d.o.o., VII. ulica 7, 1235 Radomlje; 041-819-607; 01-7297-234; [e-mail], www.Intertech.si