Technical data

39
Additional equipment for laboratory balances
Additional LCD display in plastic housing and a stand for placing on a
table.
Model WD-3/01/Y compatible with:
3Y series;
Model WD-3/01 compatible with:
XA; AS/X; AS/C; PS/X; PS/C; APP/C series;
Model WD-4/01 compatible with:
WLC; WTB; PUE/C31
Model
LCD ADDITIONAL DISPLAY (in plastic housing)
The shield is designed for balance with weighing pan 128×128 mm. It
is an optional equipment for balances operating in unfavourable
conditions (breeze, wind). It is installed in place of standard pan
protection. It is equipped with top and side sliding doors (free access
to weighing pan).
Compatible with:
PS/X; PS/C (pan size 128x128mm).
Model
ANTI DRAFT CHAMBER
Antistatic ionizer is used to remove overflow of plus ions mainly,
minus ions from the load as well and elements of balance and
environment. Electric charges of air are neutralized what give quasi-
balance of plus and minus ions.
Unbalance of plus and minus ions in the air can cause unwanted
electric influences (attraction or repulsion) of elements which are in
small distances to each other. It is usual for non-conducting materials
(plastic, glass). Some of the elements of balance are made of plastic
and glass. This problem can affect the balances. Usually this problem
appears as multiply repeatability error or as multiply error of
indications.
Model DJ-03 compatible with: MYA series
Model DJ-02 compatible with: XA; AS series.
Model
ANTISTATIC IONIZER - Models: DJ-03 / DJ-02
LCD ADDITIONAL DISPLAY
ANTI DRAFT CHAMBER
ANTISTATIC IONIZER
Intertech d.o.o., VII. ulica 7, 1235 Radomlje; 041-819-607; 01-7297-234; [e-mail], www.Intertech.si