Technical data

36
Moisture analyzers
MAC/NS
Moisture
determination
Dry mass
determination
Drying profiles
Finish modes
Halogen or
infrared lamps
GLP
procedures
Permeability
of water vapour
Moisture analyzers are measuring devices designed especially for determination of moisture content in relatively small samples
of various substances. This special version called MAC 50/NS is designed to meet the requirements of HACCP (ang. Hazard Analysis
and Critical Control Points) which is a systematic preventive approach to food safety and pharmaceutical safety that addresses physical,
chemical, and biological hazards as a means of prevention rather than finished product inspection.
Both internal and external parts are produced without use of glass, heating element is a metal heater instead of halogen lamp.
Moisture analyzer MAC features:
• easy operation provided by backlit LCD display,
• drying profiles (standard, mild, step, rapid),
• finish mode (manual, humidity stabilization, automatic, time defined),
• GLP/GMP printouts and report,
• metal heater as source of heat, power 400 W,
• standard and non-standard applications,
• optimization of work due to heater modes.
Maximal capacity of moisture analyzer MAC/NG ranges from 50 g /0,1 mg to 210 g/1 mg. Moisture content is measured with
accuracy 0,001% (0,0001% for MAC 50/1). Maximal drying temperature equals 160°C. Each moisture analyzer is equipped with aluminium weighing
pan with dimensions ø 90mm. A moisture analyzer with a specially designed kit enables determining water vapor permeability through samples of
different substances.
Model Max d Pan size
Accuracy of
moisture readout
MAC 50/ NS 50 g 1 mg Ø 90 mm 0,01/0,001 %
MAC 110/ NS 110 g 1 mg Ø 90 mm 0,01 %
MAC 50/1/ NS 50 g 0,1 mg Ø 90 mm 0,01/0,001 %
MAC 210/ NS 210 g 1 mg Ø 90 mm 0,01 %
Intertech d.o.o., VII. ulica 7, 1235 Radomlje; 041-819-607; 01-7297-234; [e-mail], www.Intertech.si