Technical data

35
Moisture analyzers
MAC
Moisture
determination
Dry mass
determination
Drying profiles
Finish modes
Halogen or
infrared lamps
GLP
procedures
Permeability
of water vapour
Higher level
of temperature
Moisture analyzers are measuring devices designed specially for determination of moisture content in relatively small samples
of various substances. Moisture analyzer MAC features:
·easy access provided by backlit LCD display,
·drying profile (standard, mild, step, rapid),
·finish mode (manual, humidity stabilization, automatic, time defined),
·GLP/GMP printouts and reports,
·halogen or infrared lamps,
·standard and non-standard applications,
·optimization of work due to halogen lamps mode.
Maximal capacity of moisture analyzer series MAX ranges from 50 g /1 mg to 210 g/1 mg. Moisture content is measured with accuracy
0,01% (0,001% for samples up to 1,5g). Maximal drying temperature is 160°C (an extra cost option is a moisture analyzer with
temperature upgraded to 250°C - 200EUR).
Each moisture analyzer is equipped with aluminium weighing pan with dimensions ø 90mm.
A moisture analyzer and a
specially designed kit enable determining water vapour permeability through samples of different
substance.
Model Max d Pan size
Accuracy of
moisture
readout
MAC 50/NH
• •
50 g 1 mg ø 90 mm 0,01/0,001 %
MAC 50/NP
• •
50 g 1 mg ø 90 mm 0,01/0,001 %
MAC 110/NH
• •
110 g 1 mg ø 90 mm 0,01 %
MAC 110/NP
• •
110 g 1 mg ø 90 mm 0,01 %
MAC 50/1/NH
• •
50 g 0,1 mg ø 90 mm 0,01/0,001 %
MAC 50/1/NP
• •
50 g 0,1 mg ø 90 mm 0,01/0,001 %
MAC 50/WH
• •
50 g 1 mg ø 90 mm 0,01/0,001 %
MAC 210/NH
• •
210 g 1 mg ø 90 mm 0,01 %
MAC 210/NP
• •
210 g 1 mg ø 90 mm 0,01 %
MAC 50/1/WH
• •
50 g 0,1 mg ø 90 mm 0,01/0,001 %
MAC 110/WH
• •
110 g 1 mg ø 90 mm 0,01 %
MAC 210/WH
• •
210 g 1 mg ø 90 mm 0,01 %
halogen lamps IR emitters max. temp 160 °C max. temp 250°
Intertech d.o.o., VII. ulica 7, 1235 Radomlje; 041-819-607; 01-7297-234; [e-mail], www.Intertech.si