Technical data

21
Precision balances
PS/C1
Parts counting
Density
determination
Checkweighing
Percentage
Under-hook
weighing
GLP
procedures
Balances series PS are equipped with 12 key front panel and LCD backlit display. Pan dimension is this series is 195×195 mm or
128×128 mm with a glass shield over the weighing pan which protects the load against possible breeze. Each balance has RS 232
and additional display outputs as standard. GLP procedure is available in a non-modifiable form of a report from balance calibration.
Balances marked as C/1 are equipped with system of external calibration. Balances are equipped with optional weighing of loads
outside the weighing pan, so called under hook weighing. it is an alternative for weighing loads with non standard dimensions or made
of magnetic substances. Under hook weighing is additionally applied in case of density determination procedure.
Model Max d e Pan size
PS 200/2000/C/1
•
200/2000 g
0,001/0,01 g
0,01/0,1 g 128×128 mm
PS 210/C/1
•
210 g 0,001 g 0,01 g 128×128 mm
PS 360/C/1 360 g 0,001
g
128×128 mm
PS 510/C/1 510 g 0,001 g 128×128 mm
PS 750/C/1 750 g 0,001 g 128×128 mm
PS 1000/C/1 1000 g 0,0
01 g
128×128 mm
PS 1200/C/1
•
1200 g
0,01 g
0,1 g 195×195 mm
PS 2100/C/1
•
2100 g
0,01 g
0,1 g 195×195 mm
PS 3500/C/1 3500 g
0,01 g
195×195 mm
PS 4500/C/1 4500 g 0,01 g 195×195 mm
PS 6000/C/1 6000 g
0,01 g
195×195 mm
PS 8000/C/1 8000 g 0,01 g 195×195 mm
internal calibration
Intertech d.o.o., VII. ulica 7, 1235 Radomlje; 041-819-607; 01-7297-234; [e-mail], www.Intertech.si