User's Manual
Table Of Contents
- 1. General Information
- 2. Transport and Storage
- 3. Unpacking and Installation
- 4. Start-Up
- 5. Keyboard – Buttons Functions
- 6. Weighing Mode Home Screen
- 7. Operating Balance Menu
- 8. Weighing Operation
- 8. Adjustment
- 9. Working Modes – General Information
- 10. Databases
- 11. Communication
- 12. Peripheral Devices
- 13. Communication Protocol
- 14. Error Messages
- 11 -
AS X2.PLUS
•
remove a transport lock (1) – gently press the transport lock and turn it accordingly to
<OPEN> instruction, keep the transport lock should your balance be transported in the
future.
• Install components following the above diagram:
• bottom insert (2),
• centring ring [embossment side up] (3),
• weighing pan (4),
• draft shield (5).
CAUTION! AS balance with d=0,01/01mg is equipped with 2 weighing pans (standard and open-work).
Remember to calibrate the balance upon changing the pan.
PS 200/2000.X2-PS 1000.X2 PS 2100.X2-PS 10100.X2
• remove tape protecting the grounding spring, located on one of the rubber mandrels
• install components following the above diagram:
• weighing pan (2),
• draft shield (3).