User's Manual
Table Of Contents
- 1. General Information
- 2. TRANSPORT and Storage
- 3. Unpacking and Installation
- 4. Keyboard – Buttons Function
- 5. Start-Up
- 6. Adjustment
- 7. Databases
- 8. Export and Import of Databases
- 9. Working Modes
- 10. Weighing Operation
- 11. Communication
- 12. PERIPHERAL DEVICES
- 13. Cooperation with Peripherals
- 14. Communication Protocol
- 15. Error Messages
- 20 -
Once the button
has been pressed, the name of the first available function is shown.
or - press to select working mode
- press to enter the selected working mode
CAUTION!
Upon restart, the balance is launched with the most recently operated working mode!!! For settings of this
function read of this user manual.
10. WEIGHING OPERATION
10.1.1. Good Weighing Practice
In order to ensure long lasting use of a balance plus correct and reliable measurement of weighed
loads, follow below procedures:
• Start the balance with no load on the weighing pan (permissible value of load on the weighing
pan on balance start is ±10% of its maximum capacity).
• Load the weighing pan steadily avoiding shocks:
YES
NO
• Place weighed loads centrally on the weighing pan:
YES
NO