User's Manual
Table Of Contents
- 1. General Information
- 2. TRANSPORT and Storage
- 3. Unpacking and Installation
- 4. Keyboard – Buttons Function
- 5. Start-Up
- 6. Adjustment
- 7. Databases
- 8. Export and Import of Databases
- 9. Working Modes
- 10. Weighing Operation
- 11. Communication
- 12. PERIPHERAL DEVICES
- 13. Cooperation with Peripherals
- 14. Communication Protocol
- 15. Error Messages
- 16 -
• Run home screen and press button, next select <LOG IN> option, operators database
window opens with list of available users, or press function button with <LOG IN> function
assigned, or press
button, enter users database and select <ADMIN> user.
• Press button for confirmation, wait to be asked for a password.
• Enter the password: „1111”, next press for confirmation.
• Home screen of the software is displayed again automatically.
• When logged, add users and set the permissions levels.
On future Logging In, select a user from the list and enter the password, the software initiates
operation with permissions level set for the selected user.
If any user is logged in, a pictogram
is displayed.
Log out operation – procedure:
•
Select <NONE> position out of the list of available users
• Home screen of the software is displayed again, and the display shows no logged-in user (no
logged-in user, no pictogram
on the display).
5.4. UNITS
UNITS parameter group enables the user to change availability of mass units (the change can be
performed in-course of balance operation), and to define two custom units, thus positively effecting
comfort and speed of operation. It is possible to change unit to other than unit [g] during weighing
process or during operation of other modes. Working modes Parts Counting and Percent Weighing
are exceptions.
5.5. TEMPORARY MEASURING UNIT
Function enables selecting a measuring unit which is to be indicated next to mass reading during the
operation. The set measuring unit will be in use from the moment of its activation until its change or
switching the balance off and on.
Each pressing of the
button results with change of the measuring unit.
Units list:
Unit Denotation
Verified
balance
Unit Denotation
Verified
balance
gram [g] yes Taele Singapore [tls] no
milligram
[mg]
yes *
Taele Taiwan
[tlt]
no
kilogram [kg] yes * Taele China [tlc] no
carat [ct] yes * Momme [mom] no
pound [lb] no Grain [gr] no
ounce
[oz]
no
Newton
[N]
no
ounce Troy [ozt] no Tical [ti] no
pennyweight
[dwt]
no
baht
[baht]
no
Taele Hongkong [tlh] no tola [tola] no