User guide

Getting Started | 16
RADVISION | User Guide for SCOPIA XT5000 Series Version 3.0
Step 3 Select General under Preferences.
Figure 3-8 Setting the XT Remote Control Unit Code
Step 4 Enter the code in the Remote control code field.
Step 5 Select Save.
Step 6 On the XT Remote Control Unit, press and simultaneously.
The On/Off key on the XT Remote Control Unit turns red.
Step 7 Using the keypad, type the number you just entered in the Remote control code field.
Note: You must always use two digits for a code. For example, to set the code to “1”, enter
“01”.
Step 8 Select Finish.
The code of the XT Remote Control Unit is changed and the Remote Control icon and the new
Remote Control code appear at the top of the screen.