System information

Step 3
Set the fields as required.
Field Name Description
AT commands
management
Enables/disables AT command API for remote control.
Enable all addresses If set to Yes, enables access to the XT Codec Unit from any IP
address in a network. If set to No, configure Address and
SubNet mask.
Address Enter the IP address allowed to access the system.
SubNet mask Enter the SubNet mask associated with the IP address.
Step 4
Press Save.
Configuring the System for SNMP Management
Integration with SCOPIA iVIEW Management Suite allows remote monitoring, configuring,
upgrading and control features of SCOPIA XT Series endpoints, using SNMP (Simple Network
Management Protocol) and an AT command-based protocol on TCP/IP. In particular, these
features have been introduced:
•
Monitoring - SCOPIA iVIEW Management Suite can request identification and access
capabilities from the endpoint.
•
Status traps - SCOPIA iVIEW Management Suite is able to detect if the terminal is turned
on, and its call status.
Before you begin
Ensure you have the IP addresses and the subnet mask of the computers which you want to
use for remote management of SCOPIA XT Series.
Procedure
Step 1
Access the SCOPIA XT Series web interface.
Step 2
In the Administrator settings tab, select Utilities > Remote Access > SNMP.
RADVISION | Administrator Guide for SCOPIA XT5000 Series Version 3.0 Maintenance Tasks | 21