Setup guide

RADVISION, an Avaya Company | Release Notes
SCOPIA XT4000 and XT5000 Series | 8
- It is not possible to add H.263 participants while in a conference
- Lecturer mode is not supported
Such limitations will be removed in a future firmware version
Note:
XTD Server minimal installation requirements are:
OS: Window Server 2003/2008
RAM: 2G
Disk: 20G
CPU: Dual Core Intel Pentium E5400 2.70GHz
NIC: 100 Mbit
Please refer to XTD Server setup guide for more details.
Web Video
In this version the XT Codec local video input (HD camera or DVI) can be remotely monitored using a
Web Browser, when the system is NOT IN A CALL.
Browse to http:// < system IP Address >, enter username and password (by default Admin/1234), then
select More Actions > Web Video
Refresh rate and Zoom level can be defined. Snapshots can also be saved as photo in your PC.
When your system is monitored using Web Video, an eye icon is displayed in the system GUI top bar,
near the time.
To define the rules for the remote access to your local camera, browse to GUI> Configure> Advanced
>Utilities>Remote Access>Web Video. You can disable the feature, or limit the IP addresses enabled to
your system using Web Video, or require a password.