Setup guide
RADVISION, an Avaya Company | Release Notes
SCOPIA XT4000 and XT5000 Series | 4
• Present: Activate a local presentation. The presentation will be automatically activated when
the PC output signal is detected, by connecting a PC to the DVI input of the system.
• Control Camera: Change video input, move the camera, activate video privacy before a call,
store and recall camera presets.
• Configure: Check information about your system and system status. Configure basic systems
settings. You can also repeat the quick setup steps if needed. If a yellow exclamation mark
icon appears on the header bar of the system, the System status menu can give additional
information about the notification (for instance your network cable is not connected).
An optional PIN can be set to protect access to Quick Setup and Basic Settings
• Configure with Advanced Settings: It is possible to show/hide Advanced Settings menu item
(Configure>General>Show Advanced Settings = Yes/Hide). When shown, access to these pages
is restricted by a PIN code (default 1234).
During a call, a call control panel can be activated any time by pressing OK. After a few time, the call
control panel and the top header bar disappear.
The call control panel gives immediate access to the following features:
• Mute: Mute and un-mute your local microphones
• Present: Send a PC presentation or the video from an additional HD camera to the remote
end.
• Do not Disturb: Automatically decline incoming calls without being notified (This item is
disabled when Multi-conference feature is not available).
• Privacy: Pause transmission of your video to the remote end.
• Control Camera: Change video input, move cameras, store and recall camera presets. All
these actions can also be executed on far end cameras, if the remote peer allows their
cameras to be controlled.
• Layouts: Change the visualization of the local, remote and presentation videos, giving a
preview of the selected layout. A single person represents the local video, a group of persons
represents the remote video, and a bar chart represents a presentation.
• Stats: View statistics about the call (information about the remote peer system; call rate,
audio, video and presentation streams)
When in a conference, press left and right arrows to browse stats of different participants
• Meeting: Additional management of local/connected systems. (This item is disabled when
Multi-conference feature is not available or your endpoint is not participating in a H243
managed conference)
Supported Languages
SCOPIA XT5000 and XT4000 Series supports a wide set of languages: English, French, Spanish, Deutsch,
Italian, Portuguese, Norwegian, Swedish, Chinese (Mandarin), Japanese, Russian, Korean, Czech,
Magyar, Polish, Finnish, Thai, Traditional Chinese, Turkish, Arabic, Farsi.
Web Interface
SCOPIA XT5000 features can be managed using a standard WEB browser.
To login into the Codec Unit using a browser, browse to http:// < system IP Address >; the default
credentials are:
User: Admin
Password: 1234
HTTPS is also supported to enhance security.