Setup guide

RADVISION, an Avaya Company | Release Notes
SCOPIA XT4000 and XT5000 Series | 21
synthetic image. If privacy is active since beginning of the call, black video is sent.
QC#11265
Digital Audio Out is not available
QC#11263
Monitor borders adjustment done for graphics are not applied to DVI input or received presentation
(received pres to be tested)
QC#11261
Audio from HDMI input is not supported
QC#10972
If the user set the system with a wrong IP address the system doesn't report a warning to the user
QC#10727
IOT issues with Polycom VSX 7000 Rel. 8.7.1
QC#10725
The video from XT5000 in HD/SD Scopia classic conference is not fluid
QC#10551
If the system enters in an Elite conference with presentation active, the system receives a black
presentation
QC#10456
WEB: Saving Internet Time no->yes or making some new settings into Time Zone menu the web
browser does not respond
Some settings in GUI advanced pages are not working
IOT
Fixed SIP video compatibility issue between Avaya software client (Counter Path software house)
and XT5000.
Solution: Inserted packetization field "packetization-mode=0" (optional in this case) for H.264
baseline profile
IOT
Fixed issue related to SIP timers. This issue prevents, for example, sending RTCP statistics, reading
RTP packets if "POLLING" mode is used. It is also important to have SIP H264 SVC / H264 HiP SVC
working (they are based on RTCP statistics).
IOT
Fixed issue when connecting to XT endpoints with new format x.y.z.n in version numbering
IOT
Fixed not standard usage of disconnection cause zero (not allowed by Q.931), now converted to 31
(Normal, unspecified). In this way Q.931 release complete message does not any more contain a
bad disconnection cause value.
IOT
In case received bearer caps do not contain any rate information ("Transfer mode = Packet mode")
the remote max rate now is set to the max configured system rate instead of default 384 Kbits.
IOT
Added Patch to parse wrong string m-stream used by Polycom for the SDP/BFCP instead of "mstrm”
IOT
Applied RADVISION H.323 stack patch to get Brazilian homologation for H.323
(RV_H323_ETSI_TS_101_804_02_COMPLIANCE)
IOT
Applied Sip application patch to fix Brazilian homologation issues:
- SIP-CC-OE-CE-TI-011
- SIP-CC-OE-CE-TI-012
IOT
Sip application patch to fix Brazilian homologation issues:
- SIP-RG-RT-TI-005
- SIP-CC-OE-CR-TI 005
Reduced T1 timer from its 500ms default value to 400ms
IOT
Sip application patch to fix Brazilian SIP homologation
- SIP_CC_OE_CE_V_019
- SIP_CC_TE_SM_I_001
IOT
Radvision Toolkit patch for H.323 Brazilian homologation
- RAS_TE_BND_06
- RAS_TE_BND_07
- RAS_TE_BND_08
- RAS-TE-DIS-02
- BCC-TE-S-U00-08,
- BCC-TE-S-U01-10
- BCC-TE-S-U01-11
- BCC-TE-S-U03-07
Known Issues
RADVISION performs effective testing of each software version. Patch software may be available to fix
known issues of this software version. Please contact RADVISION’s Customer Support Service for
further information.
Category ID Description Resolution
System Setup QC#12897
Camera placed on top of the system
case may provoke system overheat.
Automatic protection from such
overheat may cause system reset.
Place the camera nearby the system.