Setup guide
RADVISION, an Avaya Company | Release Notes
SCOPIA XT4000 and XT5000 Series | 20
Resolved Issues
Version 3.1.0.28 of the SCOPIA XT5000/XT4000 Series includes resolved problems from previous
version 3.0.132.
• Fixed random resets of systems with LED flashing. PIC firmware had a timeout to recover
communications blocks that could be too low in some environmental conditions.
• Fixed IOT issues with Avaya Communication Manager, Multivantage and IPOffice platforms
• Fixed DVI/XGA capture issues with some PC resolutions
• Fixed H323/SIP issues for Brazilian Homologation
Issue ID
Description
QC#18292
QC#18290
IPOFFICE-32380, IPOFFICE-32383:
Embedded MCU Wrong number of audio participants.
QC#17947
Avaya Integration Rad #71 [XT/SIP]: XT5000 reboots 25 seconds after call from 1XC-sip video unmute
QC#17872
Issues if a particular character is present into SIP name
QC#17763
SI #16384-10295: Incident #16384-10295: Feature Request: XT5000 ability for users to add contacts
from the on screen Contact Page itself
QC#17502
Avaya Integration Rad #67: XT5000 transmits CIF instead of 720p (or 1080p) when in conference and
using external video source
QC#17501
Avaya Integration Rad #66: XT5000 statistics pops up every time the layout is switched
QC#17500
OK button doesn't wake up GUI from Presentation mode.
QC#17396
Rolling Reboots - SN 1216280509
QC#17395
Video issue after an invalid call.
QC#16856
Avaya Integration Rad #56 [XT/SIP]: SIP registered XT-series negotiate G.711 instead of G.722 when
dialed by Avaya endpoints.
QC#16856
Avaya Integration Rad #56 [XT/SIP]: SIP registered XT-series negotiate G.711 instead of G.722 when
dialed by Avaya endpoints
QC#16714
Avaya integration Rad #53 [XT/SIP]: XT-series endpoint becomes unregistered from SM
QC#16536
the system doesn't use the codec w240p
QC#16531
Sometimes when the system is waked up from screen saver it displays a black screen
QC#16461
IPOFFICE-30596: "RADVISION: Display is not updated after blind transfer".
QC#16460
IPOFFICE-30593: "RADVISION: Wrong display name: call from XT5000 to Flare"
QC#16364
Web server is blocked if the user select an LDAP unreachable server
QC#15022
If the user makes SIP IPV6 recall the system will not send audio video to the remote
QC#14977
Random crash when the user wakes up the system from the screen saver
QC#14964
Into "Phonebook" or "Recent call" menu the remote control emulation from web doesn't correctly
work
QC#14801
GK Registration could not work fine if both GLANs are using a Private IP Range (192.168.x.x, 10.x.x.x
or 172.16-31.x.x) (Incident #16384-9985)
QC#14158
[AMDOCS] XT5000 at 720p and lower transmit picture with low sharpness and cold colors (Incident
#158406)
QC#13694
XT5000 did reboot after it was invited in SIP to a meeting
QC#12895
Graphics is not visible or video is black when using two non homogeneous monitors at the same time.
QC#11196
XT5000 could lose GK Registration when changing any GLANs IP configuration detail (Incident
#157874)
QC#11269
H.263 Video coding is not supported for main video and presentation in this software version
QC#11269
H.263 Video coding Sony EPs PCS-1, PCS-TL30, PCS-G50 series could not open their TX Video Channel
(Incident #8192-13651)
QC#11269
H.263 Video coding Main Video and/or Presentation could not be established between XT5000 and
Polycom VSX systems
QC#11269
H.263 Video coding H.239 Presentation Channel is not working with MCU Elite Classic if it is
configured to use H.263 video coding.
QC#11267
When the system is in privacy mode, last video frame is sent to the remote end instead of a