Setup guide

RADVISION, an Avaya Company | Release Notes
SCOPIA XT4000 and XT5000 Series | 13
To change Basic Pin, go to Advanced>Utilities>PIN Protect Settings>Basic Settings> Yes.
Insert a 4-digit PIN and confirm it.
It is also possible to define a renewal option for the Basic Access PIN.
PIN Protect Renewal = “Always”: user must insert PIN at any access
PIN Protect Renewal = “n Minutes”: user must insert PIN only when accessing again after “n”
Minutes.
Do not disturb status
In the main page, a message is displayed when the system is in Do Not Disturb (DND) mode.
To deactivate DND, move the focus to the “Turn off Do not disturb” button using the arrows and press
OK.
You can also press and hold the “Privacy” key or the “Mute” key on the Remote Control Unit to
quickly toggle (activate/deactivate) Do Not Disturb status.
MCU pages
When in a call, if your MCU license is active, the Meeting button in the call panel is enabled.