Setup guide

RADVISION, an Avaya Company | Release Notes
SCOPIA XT4000 and XT5000 Series | 10
Preset Management
Using the local GUI is now easier to store and recall up to 10 presets.
In Control Camera, press OK for other options, then select Presets.
When controlling your local camera, you can assign, select and delete presets.
Assigned presets are marked with a blue indicator.
To store a position:
Press a numeric key [0..9] to select a position. Selected position indicator blinks.
You can move/zoom the camera, and press OK when done.
The selected preset position indicator will become blue.
To delete an assigned position:
Press a numeric key [0..9] to select a blue position. Selected position indicator blinks.
Press C to clear the assigned position. The blue indicator is cleared.
To recall a stored preset position:
In any page, long press the digit corresponding to the preset.
Note:
When controlling a far camera, no blue graphic marker indication is present for
assigned presets.
Far presets cannot be deleted.
Using a Web browser, it is possible to store, select and delete up to 122 presets.
Browse to More Actions> Camera Control>Presets.