Installation guide

Figure 5-36 Configuring QoS settings
Step 2
Set the fields as described in Table 5-18 on page 89.
Table 5-18 Configuring QoS settings
Field Name Description
Use QoS Enable/Disable QoS. If you set Use QoS to Yes, you will provide
different priority to different data stream, or guarantee a certain level
of performance to a data stream. In particular, you may choose
between Precedence/TOS and Differentiated Service.
Quality of service Precedence/TOS - For each stream (Audio, Video, Data, Signal) sent to
the system, you may define the Type Of Services and a Precedence to
fit network capabilities. Precedence is priority. A higher number sets a
higher priority. Used mainly to class router packets as high priority.
Differentiated Service - For each stream (Audio, Video, Data, Signal)
sent to the system, you may define a priority level to fit network
capabilities.
Step 3
In the web interface, select Save.
Note
In the endpoint, your changes are saved automatically.
RADVISION | Installation Guide for SCOPIA XT5000 Series Version 3.1 Initial Configuration | 89