Installation guide
Note
Set the ports in accordance with the settings detailed in “Configuring the TCP or
UDP Port Range on the SCOPIA XT Series” on page 18.
Step 3
In the web interface, select Save.
Note
In the endpoint, your changes are saved automatically.
Configuring Quality of Service (QoS)
Quality of Service determines how your network handles IP packets sent to your system during
a video conference.
Bandwidth and video quality settings also contribute to call quality. If you experience
problems with call quality, refer to the Troubleshooting chapter of the Administrator Guide
for SCOPIA XT Series.
Before you begin
Consult with your network administrator for more information about configuring Quality of
Service.
Note
For detailed information on QoS based on TOS, refer to RFC-1439.
Procedure
Step 1
Access the network settings as follows:
•
From the web interface, select Administrator Settings > Networks > Preferences > QoS.
•
From the endpoint, select Configure > Advanced > Networks > Preferences > QoS.
RADVISION | Installation Guide for SCOPIA XT5000 Series Version 3.1 Initial Configuration | 88