Installation guide
Figure 5-28 Configuring the Microphone Pod settings from the web
interface
Step 3
Set the fields as described in Table 5-12 on page 75.
Table 5-12 Configuring the Microphone Pod connection
Field Name Description
Enabled Enables/disables the Microphone Pod.
Gain Use the slider to adjust the fixed Gain Control, setting the voice signal
to the desired level. The AGC reduces the volume if the audio is
strong and raises the volume if the audio is weak.
Echo canceller Enable the echo canceller when working with an external microphone
system that does not contain echo cancellation. Disable this setting
when working with an external mixer that handles echo cancellation.
If enabled check the field settings in “Configuring the Echo Canceller”
on page 78, and configure if required.
Step 4
In the web interface, select Save.
Note
In the endpoint, the changes are saved automatically.
Configuring Analog Audio Connections
You must perform this procedure if you are using the analog audio connections:
RADVISION | Installation Guide for SCOPIA XT5000 Series Version 3.1 Initial Configuration | 75