Installation guide
Figure 5-16 Setting Country and Language
Step 2
Select the required country from the Country list using the arrow keys and press .
The system menu and the Language field automatically change to the language used in the
selected country.
Step 3
If you want to change the language of the system menus, select Language and press . The
list of languages is displayed. Scroll to the preferred language and press .
Step 4
Continue with one of the following:
•
To adjust the image on your monitor, select Next and continue with “Adjusting the Image
Position” on page 55.
•
To exit the quick setup wizard, select Close.
Adjusting the Image Position
If your monitor does not center the image correctly, perform this procedure.
Before you begin
This procedure is performed as part of the Quick Setup Wizard, after “Setting the System
Name and Language” on page 54.
Start the Quick Setup Wizard by selecting Configure > Quick Setup from the Main menu.
Note
This can be done from the endpoint itself only.
RADVISION | Installation Guide for SCOPIA XT5000 Series Version 3.1 Initial Configuration | 55