Installation guide

Step 3
If you are enabling licenses with additional features, such as an embedded MCU or higher
bandwidth, see “Installing and Enabling Licenses which Extend System Functionality” on page
52.
Registering the SCOPIA XT Series to Obtain a License Key
Register your XT Series to obtain your license key to activate the features of the XT Codec
Unit, and receive a number of additional benefits:
Notification of software updates and new features availability.
Be the first to know about product support alerts.
Access to RADVISION’s user-community.
Procedure
Step 1
Open the envelope that came with the XT Series.
Step 2
Locate the serial number and the product key in the letter inside the envelope. The serial
number is printed on a label affixed at the back of the XT Codec Unit.
You can find the user code (and the serial number) by selecting Configure > About from the
Main menu.
Step 3
On a computer, open a browser and navigate to http://www.radvision.com/XT5000.
Step 4
Complete the online registration form and enter the serial number (or the user code) AND the
product key.
The web registration form returns an active license key.
Step 5
Write down the license key and keep it in a safe place for future use.
Step 6
Use the license key to enable the software.
Note
You can obtain other license keys in the same way, when you need them to enable
optional features in the XT Codec Unit, such as the embedded MCU. For details, see
“Installing and Enabling Licenses which Extend System Functionality” on page 52.
Step 7
Continue with enabling the license:
“Remotely Enabling the License from the Web Interface” on page 49
“Enabling the License from the SCOPIA XT Series Endpointon page 51
Remotely Enabling the License from the Web Interface
This procedure describes how to enable the software license of an XT Codec Unit remotely via
the web interface. You can also enable the license from the endpoint's interface, as described
in “Enabling the License from the SCOPIA XT Series Endpoint” on page 51.
RADVISION | Installation Guide for SCOPIA XT5000 Series Version 3.1 Initial Configuration | 49