Installation guide

Use the XT Remote Control Unit to navigate through system menus, as follows:
•
Scroll through menus and options using the arrow keys and pressing the ok key.
Note
Use the ok key to select an item or a specific option, such as when choosing the
interface language. If there are less than 5 options in a list, press ok repeatedly to
scroll through the options.
•
Use the XT Remote Control Unit keypad to enter letters and digits. The current input
method is displayed in the field you are in:
The default input method is abc1: you must press the required character key on the XT
Remote Control Unit repeatedly before entering a digit. To enter text in the XT Series
interface, scroll to the input field and enter the required characters.
You can also select another input method that best suits the type of information you want
to enter by pressing while the cursor is in the input field. The input methods are
displayed. Press
repeatedly to switch between ABC, abc, or 123 input methods.
RADVISION | Installation Guide for SCOPIA XT5000 Series Version 3.1 Initial Configuration | 44