Installation guide

You can also perform advanced configuration from the web interface. See ā€œManaging your
SCOPIA XT Series from the Web Interfaceā€ on page 36 for details.
Before you begin
Ensure that you have the password to access the Advanced settings. The default password is
1234.
Procedure
Step 1
Access the endpoint's interface.
Step 2
Select Configure > General from the Main menu.
Step 3
Set Show Advanced Settings to Yes.
Step 4
Press the Back key on the XT Remote Control Unit.
The Advanced section now appears in the Configure screen.
Step 5
Select Configure > Advanced.
Step 6
Enter the password required to access the Advanced settings. The default password is 1234.
The Advanced screen appears.
RADVISION | Installation Guide for SCOPIA XT5000 Series Version 3.1 Initial Configuration | 42