Installation guide

Accessing SCOPIA XT Series Web Interface.............................................. page 37
Configuring Remote Management on the SCOPIA XT Series........................... page 38
Configuring Remote Upgrade Settings................................................... page 40
Accessing SCOPIA XT Series Web Interface
This procedure describes how to access the SCOPIA XT Series web interface. The SCOPIA XT
Series supports the following internet browsers:
Internet Explorer version 7 or later
Google Chrome version 11 or later
Mozilla Firefox version 3.6 or later
Apple Safari version 5 or later
Opera version 11 or later
Procedure
Step 1
Open any of the supported internet browsers and enter the XT Codec Unit IP address.
For example, http://192.168.185.25/.
The SCOPIA XT Series login page opens.
Figure 5-1 Logging into the SCOPIA XT Series web interface
Step 2
Enter the username and password.
The default credentials for remote access are:
Username - Admin
Password - 1234
Note
We recommend changing the default credentials after logging in for the first time,
as described in the Administrator Guide for SCOPIA XT Series.
Step 3
(Optional) Select the web interface language from the Language list.
RADVISION | Installation Guide for SCOPIA XT5000 Series Version 3.1 Initial Configuration | 37