Installation guide
After connecting the system and powering it, perform the initial configuration as described in
these sections:
•
Managing your SCOPIA XT Series from the Web Interface............................. page 36
•
Maintaining the SCOPIA XT Series Locally from the Endpoint......................... page 41
•
Registering and Enabling your SCOPIA XT Series license.............................. page 48
•
Performing Basic Configuration........................................................... page 53
•
Setting Basic System Information ......................................................... page 60
•
Configuring Video Connections........................................................... page 65
•
Configuring Audio Connections........................................................... page 74
•
Configuring Network Settings............................................................. page 81
•
Configuring Call Properties.............................................................. page 100
•
Securing Calls.............................................................................. page 105
Managing your SCOPIA XT Series from the Web Interface
You can configure and control the SCOPIA XT Series remotely using the web interface:
•
Perform administrative tasks, such as:
–
Monitoring the status by configuring SNMP management
–
Backing up the endpoint's configuration files
•
Place a call and position the camera (see User Guide for SCOPIA XT Series for details)
•
Change settings, such as the interface language (see Installation Guide for SCOPIA XT
Series and the User Guide for SCOPIA XT Series for details)
You can also configure the SCOPIA XT Series from the endpoint itself by first enabling
advanced configuration, as described in “Maintaining the SCOPIA XT Series Locally from the
Endpoint” on page 41.
The following topics are discussed in this section:
5
Initial Configuration
RADVISION | Installation Guide for SCOPIA XT5000 Series Version 3.1 Initial Configuration | 36