Installation guide
Figure 4-11 Connecting an Analog Camera
Installing the Batteries of the XT Remote Control Unit
The XT Remote Control Unit requires CR2025 Lithium batteries (3V). When the XT Remote
Control Unit's battery power is low, an icon appears on the GUI letting you know that you
should replace the battery:
•
Half-charged Battery
•
Low Battery
Note
When the Low Battery icon appears on the display, we recommend to change batteries
immediately, to ensure proper functioning of the system.
For battery disposal information refer to the Safety Instructions leaflet.
Procedure
Step 1
Slide the battery compartment cover open.
Step 2
Put the battery in, making sure the battery is positioned correctly.
Step 3
Slide the battery compartment cover back until you hear a click.
RADVISION | Installation Guide for SCOPIA XT5000 Series Version 3.1 Setting up the SCOPIA XT Series | 35