Installation guide
Figure 4-7 Connecting the XT Premium Camera for XT5000 Series
Note
If you connect a camera to the DVI-I input, the system manages it as PC content.
Connecting the Optional XT Premium Camera
The XT Premium Camera kit contains a camera, remote control, power supply, 5-meter DVI-
HDVI cable, and 10-meter VISCA cross cable.
You can connect the optional camera to the XT Codec Unit together with other devices to get
the number of video streams that best fit your conference. Typically, you connect the main
camera to the HD CAM connector and the optional camera to the DVI connector. For
information about connecting a computer, see “Connecting a Computer” on page 24.
There are two ways of controlling the XT Premium Camera:
•
Using the XT Remote Control Unit provided with the XT Premium Camera kit.
•
Using the XT Remote Control Unit. In that case you control both cameras, main and
optional, using the same XT Remote Control Unit.
Before you begin
Verify that you have the following:
•
An HDMI to DVI adapter, needed to connect the two cameras
RADVISION | Installation Guide for SCOPIA XT5000 Series Version 3.1 Setting up the SCOPIA XT Series | 31