Installation guide

Procedure
Step 1
Connect the Microphone Pod output
to the rear panel of the XT Codec Unit.
Figure 4-4 Microphone Pod
Figure 4-5 Connecting the Microphone Pods to the XT Codec Unit of SCOPIA
XT5000 Series
Step 2
(Optional) Connect the second Microphone Pod output
to the first Microphone Pod input
.
Connecting an External Microphone System
When the two-pod configuration is not sufficient for covering the room, use an external
microphone system.
You need to acquire audio mixers from third-parties (for example, Clear One). An audio mixer
can connect multiple microphones, mix them, cancel the echo and generate a single audio
stream that feeds into the audio inputs of your SCOPIA XT Series XT Codec Unit.
RADVISION | Installation Guide for SCOPIA XT5000 Series Version 3.1 Setting up the SCOPIA XT Series | 28