Installation guide
Table 4-1 DVI input formats supported by XT Codec Unit
Name Resolution
1080p 1920x1080
SXGA 1280x1024
HD+ (900p) 1600x900
WSGA 1440x900
UVGA 1280x960
WXGA 1280x768
720p 1280x720
XGA 1024x768
SVGA 800x600
VGA 640x480
Procedure
Step 1
Connect your computer to the XT Codec Unit:
•
For computers and laptops with a DVI out connector, connect the DVI cable to the DVI-I
socket of the XT Codec Unit and connect the other end of the cable to the computer.
Figure 4-2 Connecting a computer to SCOPIA XT Series
•
For computers with a VGA output connector, use the included DVI to VGA adapter.
a. Connect the DVI-VGA adapter to the DVI-IN socket of the XT Codec Unit.
b. Connect a VGA cable to the adapter. This cable is not supplied with the system.
c. Connect the VGA cable to the PC/Laptop VGA out socket.
Step 2
Connect the computer audio to the XT Codec Unit.
RADVISION | Installation Guide for SCOPIA XT5000 Series Version 3.1 Setting up the SCOPIA XT Series | 25