Installation guide

Figure 5-46 Configuring audio settings from the web interface
Step 2
Disable specific audio codecs by selecting No from the lists.
Step 3
In the web interface, select Save.
Note
In the endpoint, your changes are saved automatically.
Configuring Video Compatibility with Older Systems
Some older endpoint may be not fully compliant with more recent standard, and thus not able
to recognize and manage recent video protocols such as HD 1080 (full HD) or Dual Video SIP
(BFCP). As a consequence the video on these endpoints may not work.
The endpoint administrator must disable specific video codec if any compliance issue with
older endpoints arises.
Procedure
Step 1
Access the video settings as follows:
From the web interface, select Administrator Settings > Calls > Preferences > Video.
From the endpoint, select Configure > Advanced > Calls > Preferences > Video.
Step 2
Select Video under Preferences.
RADVISION | Installation Guide for SCOPIA XT5000 Series Version 3.1 Initial Configuration | 104