Installation guide
Table 5-21 Configuring SIP-related parameters
Parameter Description
User Enter the system user name (alias). The
system is registered to the SIP Registrar under
this name.
Authentication Name If necessary, enter the name for
authenticating the XT Series with the SIP
Proxy server and SIP Registrar. It can be the
same as the User parameter.
Authentication Password If necessary, enter the password for
authenticating your XT Series with the SIP
Proxy server and SIP Registrar.
Listening Port Enter the number of the port used by XT
Series for receiving inbound SIP calls. By
default, port 5060 is used.
Transport Outbound Call Select the preferred transport protocol for
outbound SIP calls: TCP or UDP.
Use SIP Registrar Enable registering the system to the SIP
Registrar by selecting Yes.
Registrar DNS Name Enter the DNS name or IP address of the SIP
Registrar.
Use SIP Proxy Enable using the SIP Proxy by selecting Yes.
Proxy DNS Name Enter the DNS name or IP address of the SIP
Proxy.
Proxy Model Select the model of the SIP Proxy server.
Specifying the model can help to avoid
potential interoperability issues. If the model
is unknown or is not on the list, select Auto.
Step 3
In the web interface, select Save.
Note
In the endpoint, your changes are saved automatically.
Configuring SCOPIA XT Series Endpoints to use an LDAP Directory
This procedure describes how to manage the contacts of your endpoint using any of a number
of different types of LDAP servers.
LDAP servers are accessed using the H.350 protocol, which enhances the LDAP standard to
include video endpoint information.
You can define up to 100 LDAP servers either from the endpoint itself or from the web
interface. The LDAP servers visible from the Contacts page are only those labeled as
Preferred. Select one of the preferred LDAP servers from the Server field in the contacts page
to view its contacts (Figure 5-40 on page 96).
RADVISION | Installation Guide for SCOPIA XT5000 Series Version 3.1 Initial Configuration | 95