Installation guide

Chapter 6 | Initial Configuration
After connecting the system and powering it on as described in Setting up the Scopia XT Endpoint for IP Office on
page 28, perform the initial configuration as described in these sections:
Navigation
•
How to Control the XT Endpoint on page 54
•
Registering and Enabling your Scopia XT Endpoint for IP Office license on page 68
•
Performing Basic Configuration on page 74
•
Registering the XT Endpoint to IP Office on page 82
•
Setting Basic System Information on page 85
•
Configuring Video Connections on page 94
•
Configuring Audio Connections on page 104
•
Configuring Network Settings on page 112
How to Control the XT Endpoint
You can set up and control your XT Endpoint, as well as make calls, in the following ways:
•
From the endpoint's main menu, using your XT Remote Control Unit (see Using the XT Remote
Control Unit on page 61 and Accessing the Main Menu of the XT Endpoint on page 60).
•
From the XT Endpoint's web interface (see Accessing XT Endpoint Web Interface on page 55).
Before performing initial configuration, we recommend reading the following topics to familiarize yourself
with how to control the XT Endpoint:
Navigation
•
Managing your XT Endpoint from the Web Interface on page 54
•
Managing your XT Endpoint Locally from the Endpoint on page 59
Managing your XT Endpoint from the Web Interface
You can configure and control the XT Endpoint remotely using the web interface:
•
Perform administrative tasks, such as:
–
Monitoring the status
–
Backing up the endpoint's configuration files
•
Place a call (for details, see User Guide for Scopia XT Endpoint for IP Office)
•
Change basic settings, such as the interface language (for details, see Performing Basic
Configuration on page 74)
Installation Guide for Scopia XT5000 Endpoint with Embedded
Server for IP Office Version 3.2
Initial Configuration | 54