User guide

Procedure

Step 1

Access the SCOPIA XT Series web interface.

Step 2

Select the Cameras tab.

Figure 7-1 Positioning cameras

Step 3

hoose the camera you want to position by selecting Local or Remote.

Step 4

Position the camera by selecting arrow buttons under Move.

Step 5

If necessary, adjust the zoom by selecting the Plus and Minus buttons under Zoom.

Step 6

Choose the other camera and position it, if necessary.

Recalling a Camera Position

This feature helps you move the camera to your preferred position and facilitates setting up

the videoconference. Just recall the preferred camera position you stored previously in the

system, and the camera moves to the memorized position.

For information about storing a camera position, see “Storing a Camera Position” on page 25.

Procedure

Step 1

Press preset on the XT Remote Control Unit.

tep 2

Enter the number corresponding to the required preset position.

RADVISION | User Guide for SCOPIA XT4000 Series Version 3.0 Managing Calls and Videoconferences | 34